The Water Quality Monitoring Station with Wireless Telemetry is designed
for monitoring multiple water-quality parameters using a combination of
sensors and a hand-held reader.
The system supports measurement of dissolved oxygen, pH, ORP, conductivity
and temperature. The multi-parameter arrangement provides researchers
with a convenient solution for collecting and monitoring water-quality
information.
The monitoring system is designed to collect information from several
important water-quality parameters. The brochure identifies dissolved
oxygen, pH, ORP, conductivity and temperature as measurement parameters.
The dissolved oxygen sensor is used to measure the concentration of
dissolved oxygen in the water. Dissolved oxygen measurements can be
used as an important parameter for evaluating water quality.
The system supports pH measurement. The specified pH measurement range
is 0 to 14 pH, with a sodium-ion error occurring when the pH is above
12.3.
The ORP sensor is used for measuring oxidation-reduction potential.
The specified ORP measurement range is +/- 2000 mV.
The conductivity with temperature sensor provides conductivity and
temperature measurement capabilities as part of the water-quality
monitoring system.
The system includes a hand-held reader for receiving and monitoring
measurements from the connected sensors. The reader provides a portable
interface for water-quality measurement applications.
The system is designed for wireless telemetry applications, allowing
water-quality monitoring systems to be configured for remote data
collection and transmission.
The system is shown with separate sensors for dissolved oxygen, ORP,
and conductivity with temperature. These sensors can be used together
to provide multiple water-quality measurements.
The system supports a pH range of 0 to 14 pH and an ORP range of
+/- 2000 mV. Temperature measurements can be made from 0 to 100°C
(32 to 212°F). The maximum pressure specified for the sensor system
is 100 psi.
The specified cable length/connector configuration is 3 metres.
Tell us what you need to measure, where it will be deployed and the application. Our team can help identify an existing EMCON solution or discuss a custom-developed system.
