Product

EMCON Solar Radiation Sensor

The EMCON Solar Radiation Sensor is a photometric sensor designed for meteorological observation where measurement accuracy and long-term stability are very important. Its low power consumption makes it suitable for remote applications. The sensor provides a linear output and is ideal for weather measuring devices.

Key Features

● Photometric sensor for solar energy and light monitoring.
● Low power consumption.
● Suitable for remote monitoring.
● Can be connected to long cables without signal loss .
● Small-size design.
● Excellent sensor interchangeability.
● Excellent long-term stability.
● Affordable cost.
● Designed for long-term outdoor operation.

Measurement Principle

The sensor uses a photodiode covering the required spectral range. It is a silicon-cell pyranometer calibrated to measure solar radiation and provides an amplified output. The sensor is classified as a semiconductor-type sensor and converts the measured solar
radiation into a linear voltage output.

Applications

  • Metrology
  • Agro-meteorology
  • Agricultural investigation
  • Agricultural evapotranspiration estimation
  • Climate control chambers
  • Architectural studies
  • Civil and structural studies
  • Educational purposes

Solar Radiation Measurement

The sensor is designed to measure solar radiation using a calibrated
silicon-cell pyranometer with an amplified output. It provides a linear
voltage signal corresponding to the measured radiation.

Remote Monitoring

The low power consumption and ability to operate with long cables make the sensor suitable for remote monitoring installations.

Outdoor Operation

The sensor is designed for long-term operation in hostile weather conditions without maintenance or recalibration.

Sensor Construction

The sensor uses a photodiode designed to cover the required spectral range. The sensing element is a silicon-cell pyranometer calibrated for solar radiation measurement with an amplified output.

Sun Shine Duration in minutes: Pulse.

Data output as pulses which is produced every 1 minute once the after
the sun light goes above 20 W/m2 and switch off once the light goes below 20 W/m2. Therefore, the total number of pulses for a day can be counted as Sun shine Duration.

Output

Solar Radiation Integration output: 3.3 or 5 volt pulses.
The pulses vary to the frequency of sunlight of a maximum 3pulses per second.

Additional Technical Specifications

●Sensitivity : For a range of 0 to 3000 W/m2. Will be a voltage scale of 0 to 5 volts. *Which is 20mVolt/10 W/m2.

Technical Specifications

Type
Photo diode type - semiconductor.
Range
0 to 3000 W/m²
Accuracy
+/- 5% of FS.
Resolution
5 W/m²
Linearity
Maximum deviation of 1% up to 3000 W/m2
Field of view
140°
Response time
≤ 20 milli second.
Operating Temperature range
-20 to 80ᴼC.
Outputs: Analog
0 to 5 V and 5 mA. capacity.
Digital
TTL direct.
Case Studies

Engineering in action.

Munambam–Alappuzha Tidal Study

10 Stations
2 Parameters
Coastal Study

Manimalayar River Hydrodynamic Monitoring System

4 Parameters
River Study
Thiruvalla

ONGC Underwater Measurement System

10 Channels
30m & 60m
5 Parameters

Bay of Bengal Ocean Thermal Wave Study

120 Metres
Multi-Channel
Bay of Bengal